Tags: Zeolite ITQ-24 Silicon oxide

Material Details

Final Magnetic Moment
0.000 μB

Calculated total magnetic moment for the unit cell within the magnetic ordering provided (see below). Typically accurate to the second digit.

Magnetic Ordering
Formation Energy / Atom
-3.263 eV

Calculated formation energy from the elements normalized to per atom in the unit cell.

Energy Above Hull / Atom
0.015 eV

The energy of decomposition of this material into the set of most stable materials at this chemical composition, in eV/atom. Stability is tested against all potential chemical combinations that result in the material's composition. For example, a Co2O3 structure would be tested for decomposition against other Co2O3 structures, against Co and O2 mixtures, and against CoO and O2 mixtures.

1.51 g/cm3

The calculated bulk crystalline density, typically underestimated due calculated cell volumes overestimated on average by 3% (+/- 6%)

Decomposes To
Band Gap
5.613 eV

In general, band gaps computed with common exchange-correlation functionals such as the LDA and GGA are severely underestimated. Typically the disagreement is reported to be ~50% in the literature. Some internal testing by the Materials Project supports these statements; typically, we find that band gaps are underestimated by ~40%. We additionally find that several known insulators are predicted to be metallic.

Space Group

Hermann Mauguin
Amm2 [38]
A 2 2
Point Group
Crystal System

Electronic Structure

Band Structure and Density of States

Warning! Semi-local DFT tends to severely underestimate bandgaps. Please see the wiki for more info.

X-Ray Diffraction

    Select radiation source:
  • Cu
  • Ag
  • Mo
  • Fe

Calculated powder diffraction pattern; note that peak spacings may be affected due to inaccuracies in calculated cell volume, which is typically overestimated on average by 3% (+/- 6%)

X-Ray Absorption Spectra


Select an element to display a spectrum averaged over all sites of that element in the structure.

Apply Gaussian smoothing:

0 eV
3 eV
FWHM: 0 eV

Download spectra for every symmetrically equivalent absorption site in the structure.

Download FEFF Input parameters.

Warning: These results are intended to be semi-quantitative in that corrections, such as edge shifts and Debye-Waller damping, have not been included.


Reference for minimal coincident interface area (MCIA) and elastic energy:
substrate orientation:
No elastic tensor calculated for this material, so elastic energies not avaialable. Sorting by MCIA instead.
substrate material substrate orientation film orientation MCIA [Å2]
GaN (mp-804) <1 0 1> <0 0 1> 173.2
CdS (mp-672) <1 0 0> <0 0 1> 173.2
Up to 50 entries displayed.
minimal coincident interface area.


A full elastic tensor has not been calculated for this material. Registered users can view statistical-learning-based predictions of this material's bulk and shear moduli.

Once you have registered you can also "vote" for full calculation of this material's elastic properties.

Similar Structures beta feature

Explanation of dissimilarity measure: Documentation.
material dissimilarity Ehull # of elements
AlPO4 (mp-557362) 0.3760 0.010 3
AlPO4 (mp-558056) 0.3865 0.011 3
Be(PO3)2 (mp-560521) 0.3886 0.003 3
AlPO4 (mp-667363) 0.4044 0.014 3
AlPO4 (mp-1019510) 0.3753 0.010 3
RbAlSiO4 (mp-6434) 0.7188 0.000 4
CsAlSiO4 (mp-561457) 0.7480 0.000 4
Cs2MgSi5O12 (mp-1019610) 0.7203 0.000 4
CsBePO4 (mp-15395) 0.6480 0.000 4
SiO2 (mp-600055) 0.1393 0.013 2
SiO2 (mp-557881) 0.1494 0.013 2
SiO2 (mp-560064) 0.1564 0.014 2
SiO2 (mp-600052) 0.1465 0.010 2
SiO2 (mp-667373) 0.1529 0.011 2
Up to 5 similar elemental, binary, ternary, quaternary, etc. structures displayed (dissimilarity threshold 0.75). Ehull: energy above hull per atom [eV].

Synthesis Descriptions

Sol-gel TiO2-SiO2 films were deposited on 316L stainless steel by dip coating process from a sono-catalysed sol of composition 30TiO2-70SiO2 prepared from a mixture of Ti(OC2H5)4 and Si(OC2H5)4, absol [...]
Bisphenol A polycarbonate (Makrolon RX 1805) from Bayer MaterialScience AG (Germany) was used as polymer matrix. A type of hydrophobic nano-SiO2 (Aerosil R8200) was chosen as filler, which was supplie [...]
chef hat mixing beaker

Explore more synthesis descriptions for materials of composition SiO2.

Text computed by

Calculation Summary

Structure Optimization

Run Type
Energy Cutoff
520 eV
# of K-points
U Values
Final Energy/Atom
-7.9009 eV
Corrected Energy
-702.1449 eV
Uncorrected energy = -663.6729 eV Composition-based energy adjustment (-0.687 eV/atom x 56.0 atoms) = -38.4720 eV Corrected energy = -702.1449 eV

Detailed input parameters and outputs for all calculations

Show JSON History Show BibTex Citation Download BibTex Citation
  • 171674
Submitted by
User remarks:
  • Zeolite ITQ-24
  • Silicon oxide

Displaying lattice parameters for primitive cell; note that calculated cell volumes are typically overestimated on average by 3% (+/- 6%). Note the primitive cell may appear less symmetric than the conventional cell representation (see "Structure Type" selector below the 3d structure)