material

Al2O3

ID:

mp-752826

DOI:

10.17188/1288819


Material Details

Final Magnetic Moment
-0.000 μB

Calculated total magnetic moment for the unit cell within the magnetic ordering provided (see below). Typically accurate to the second digit.

Magnetic Ordering
Non-magnetic
Formation Energy / Atom
-3.363 eV

Calculated formation energy from the elements normalized to per atom in the unit cell.

Energy Above Hull / Atom
0.079 eV

The energy of decomposition of this material into the set of most stable materials at this chemical composition, in eV/atom. Stability is tested against all potential chemical combinations that result in the material's composition. For example, a Co2O3 structure would be tested for decomposition against other Co2O3 structures, against Co and O2 mixtures, and against CoO and O2 mixtures.

Density
3.37 g/cm3

The calculated bulk crystalline density, typically underestimated due calculated cell volumes overestimated on average by 3% (+/- 6%)

Decomposes To
Al2O3
Band Gap
4.017 eV

In general, band gaps computed with common exchange-correlation functionals such as the LDA and GGA are severely underestimated. Typically the disagreement is reported to be ~50% in the literature. Some internal testing by the Materials Project supports these statements; typically, we find that band gaps are underestimated by ~40%. We additionally find that several known insulators are predicted to be metallic.

Space Group

Hermann Mauguin
P1 [1]
Hall
P 1
Point Group
1
Crystal System
triclinic

Band Structure

Density of States
Warning! Semi-local DFT tends to severely underestimate bandgaps. Please see the wiki for more info.

sign indicates spin ↑ ↓

X-Ray Diffraction

    Select radiation source:
  • Cu
  • Ag
  • Mo
  • Fe

Calculated powder diffraction pattern; note that peak spacings may be affected due to inaccuracies in calculated cell volume, which is typically overestimated on average by 3% (+/- 6%)

X-Ray Absorption Spectra

FEFF XANES

Select an element to display a spectrum averaged over all sites of that element in the structure.

Apply Gaussian smoothing:

0 eV
3 eV
FWHM: 0 eV

Download spectra for every symmetrically equivalent absorption site in the structure.

Download FEFF Input parameters.

Warning: These results are intended to be semi-quantitative in that corrections, such as edge shifts and Debye-Waller damping, have not been included.

Substrates

Reference for minimal coincident interface area (MCIA) and elastic energy:
substrate orientation:
No elastic tensor calculated for this material, so elastic energies not avaialable. Sorting by MCIA instead.
substrate material substrate orientation film orientation MCIA [Å2]
TeO2 (mp-2125) <1 0 0> <0 1 -1> 275.3
TePb (mp-19717) <1 0 0> <0 1 0> 259.1
LiTaO3 (mp-3666) <1 0 1> <0 1 1> 309.9
Ag (mp-124) <1 1 0> <0 1 0> 311.0
TiO2 (mp-2657) <0 0 1> <0 1 0> 259.1
CdTe (mp-406) <1 0 0> <0 1 0> 259.1
TeO2 (mp-2125) <0 1 0> <0 1 -1> 275.3
InSb (mp-20012) <1 0 0> <0 1 0> 259.1
NdGaO3 (mp-3196) <1 1 1> <0 1 -1> 275.3
SiC (mp-11714) <1 1 0> <0 1 1> 309.9
WSe2 (mp-1821) <1 1 0> <0 1 1> 247.9
MoSe2 (mp-1634) <1 1 1> <0 1 0> 259.1
WSe2 (mp-1821) <1 0 0> <0 1 1> 247.9
GaTe (mp-542812) <0 0 1> <0 1 1> 309.9
GaTe (mp-542812) <1 0 -1> <0 1 1> 309.9
Al2O3 (mp-1143) <1 0 1> <0 1 0> 259.1
Fe2O3 (mp-24972) <1 0 1> <0 1 1> 309.9
ZrO2 (mp-2858) <1 1 1> <0 1 1> 309.9
CdWO4 (mp-19387) <1 0 0> <0 1 0> 155.5
CdWO4 (mp-19387) <1 1 1> <0 1 1> 309.9
TiO2 (mp-390) <1 0 1> <0 1 1> 309.9
MgF2 (mp-1249) <0 0 1> <0 1 0> 259.1
NdGaO3 (mp-3196) <1 0 0> <0 0 1> 219.2
LaAlO3 (mp-2920) <0 0 1> <0 0 1> 328.8
LiGaO2 (mp-5854) <1 1 0> <0 0 1> 191.8
Mg (mp-153) <1 0 1> <1 -1 0> 207.1
AlN (mp-661) <0 0 1> <0 0 1> 109.6
YAlO3 (mp-3792) <1 0 0> <1 0 1> 322.5
C (mp-48) <1 1 1> <1 0 -1> 270.2
BN (mp-984) <1 0 1> <1 0 -1> 162.1
ZnO (mp-2133) <1 0 0> <1 -1 -1> 226.9
Bi2Te3 (mp-34202) <0 0 1> <0 0 1> 328.8
BaTiO3 (mp-5986) <1 1 1> <1 0 0> 316.9
MoS2 (mp-1434) <0 0 1> <1 0 1> 193.5
WS2 (mp-224) <0 0 1> <1 0 1> 193.5
Mg (mp-153) <0 0 1> <1 0 1> 193.5
C (mp-66) <1 0 0> <1 -1 -1> 283.6
CdWO4 (mp-19387) <0 1 1> <1 0 -1> 162.1
Ag (mp-124) <1 1 1> <0 0 1> 356.2
SrTiO3 (mp-4651) <1 0 0> <0 0 1> 219.2
C (mp-48) <0 0 1> <0 0 1> 109.6
GaN (mp-804) <1 0 1> <1 -1 0> 207.1
BN (mp-984) <1 1 1> <1 1 -1> 268.2
MgF2 (mp-1249) <1 0 0> <1 0 -1> 162.1
ZrO2 (mp-2858) <1 0 0> <1 0 0> 316.9
Cu (mp-30) <1 0 0> <1 -1 -1> 283.6
AlN (mp-661) <1 0 1> <0 0 1> 301.4
Mg (mp-153) <1 1 0> <1 0 1> 258.0
BaTiO3 (mp-5986) <1 0 0> <1 0 -1> 216.1
SiC (mp-8062) <1 1 0> <1 1 0> 272.8
Up to 50 entries displayed.
minimal coincident interface area.

Elasticity

Reference for tensor and properties:
Stiffness Tensor Cij (GPa)
286 75 81 21 11 19
75 320 125 -6 -2 -16
81 125 348 7 13 4
21 -6 7 110 4 8
11 -2 13 4 51 25
19 -16 4 8 25 51
Compliance Tensor Sij (10-12Pa-1)
4 -0.8 -0.6 -0.6 0.1 -1.6
-0.8 3.9 -1.2 0.3 -0.1 1.6
-0.6 -1.2 3.5 -0.1 -0.8 0
-0.6 0.3 -0.1 9.3 0.1 -1.2
0.1 -0.1 -0.8 0.1 26 -12.6
-1.6 1.6 0 -1.2 -12.6 27
Shear Modulus GV
87 GPa
Bulk Modulus KV
168 GPa
Shear Modulus GR
62 GPa
Bulk Modulus KR
164 GPa
Shear Modulus GVRH
74 GPa
Bulk Modulus KVRH
166 GPa
Elastic Anisotropy
2.10
Poisson's Ratio
0.30

Equations of State

Reference:
Equation E0 (eV) V0 (Å3) B C
mie_gruneisen -7.405 10.030 11.101 5.136
pack_evans_james -7.405 10.030 1.231 3.048
vinet -7.406 10.025 11.258 4.650
tait -7.405 10.024 1.245 5.174
birch_euler -7.405 10.029 1.391 0.054
pourier_tarantola -7.406 10.024 0.211 2.092
birch_lagrange -7.412 10.027 0.779 5.818
murnaghan -7.404 10.039 1.204 2.934
Equations reference

Similar Structures beta feature

Explanation of dissimilarity measure: Documentation.
material dissimilarity Ehull # of elements
Zn(FeO2)2 (mp-697830) 0.5313 0.225 3
Li3Mn3O8 (mp-762516) 0.6386 0.068 3
Co8As3O16 (mp-699375) 0.6768 0.045 3
Li7Ti11O24 (mp-766543) 0.6741 0.032 3
LiFeO3 (mp-765652) 0.7044 0.123 3
Li3Mn8(OF3)4 (mp-763504) 0.5993 0.070 4
Li3Fe8O3F13 (mp-764637) 0.5177 0.061 4
Li3Ni8(OF3)4 (mp-765304) 0.5997 0.070 4
Co8Te(AsO8)2 (mp-699598) 0.6112 0.009 4
LiVOF2 (mp-765260) 0.6174 0.080 4
Al2O3 (mp-684677) 0.6703 0.161 2
Al2O3 (mp-685036) 0.6005 0.111 2
Al2O3 (mp-684713) 0.7000 0.203 2
Up to 5 similar elemental, binary, ternary, quaternary, etc. structures displayed (dissimilarity threshold 0.75). Ehull: energy above hull per atom [eV].

Synthesis Descriptions

A series of sulfated zirconia (SZ) were prepared by solgel methods, from Zrn-propoxide, either with thein situone-step addition of H2SO4during the gelification process, or byex situsulfation of a Zr( [...]
TiO2Al2O3 (TiAl) and Al2O3 (Al) supports were prepared according to a previously developed procedure (Galiasso Tailleur and Ravigli Nascar [20]). TiAl support is formed by co-precipitation of alkoxide [...]
chef hat mixing beaker

Explore more synthesis descriptions for materials of composition Al2O3.

Text computed by synthesisproject.org.

Calculation Summary

Elasticity

Methodology

Structure Optimization

Run Type
GGA
Energy Cutoff
520 eV
# of K-points
None
U Values
--
Pseudopotentials
VASP PAW: Al O
Final Energy/Atom
-7.4024 eV
Corrected Energy
-195.5945 eV
-195.5945 eV = -185.0602 eV (uncorrected energy) - 10.5343 eV (MP Anion Correction)

Detailed input parameters and outputs for all calculations


Show JSON History Show BibTex Citation Download BibTex Citation
Submitted by

Displaying lattice parameters for primitive cell; note that calculated cell volumes are typically overestimated on average by 3% (+/- 6%). Note the primitive cell may appear less symmetric than the conventional cell representation (see "Structure Type" selector below the 3d structure)